Choose To Use A Square LED Panel Lights For Several Reasons

- Jul 25, 2017-

Choose to use a Square LED Panel Lights for several reasons
 1. Low energy consumption If a business monthly lighting tariff of 100,000 yuan, then the choice of LED, then its monthly only 3-4 million RMB or so, showing the effect is quite obvious.

2. Carbon dioxide is about 0.62 kilograms of carbon dioxide per kilogram of electricity. Compared with the choice of Square LED Panel Lights, you can reduce the 0.62 kg × 68% = 0.42 kg of carbon dioxide emissions, for the protection of the ecological environment play a significant role.

3. Environmentally friendly Square LED Panel Lights does not contain mercury (Hg), lead (Pb), recyclable. From the above three points can be seen that this product is in response to the country: low-carbon, energy saving, environmental protection call!

4. high brightness

5. Long life ordinary fluorescent lamp life is short, about 3000-5000 hours. The Square LED Panel Lights life of 30,000 hours or more (3-5 years), equivalent to 10 times the life of ordinary lights.

6. Wide start Square LED Panel Lights start voltage of 100V-240V can be activated. While the ordinary fluorescent lamp, the voltage is too low is not lit, can not start normally.

7. No delay Square LED Panel Lights response time for the nanosecond, turn on the lights without waiting, instant light, can be repeated many times. While the ordinary fluorescent light when there is a delay process, if the frequent switch will lead to damage to the lamp.

8. Noise-free Square LED Panel Lights do not produce noise, quiet and comfortable.

9. No strobe ordinary fluorescent use of alternating current, so every second will produce 100-200 times the strobe. The Square LED Panel Lights is the direct conversion of AC into direct current, will not produce strobe phenomenon, protect the eyes, get "soft" lighting environment.

10. Material is solid ordinary fluorescent lamp is made of glass material, fragile, dangerous. The Square LED Panel Lights, then the use of advanced engineering plastics plus aluminum alloy, built-in semiconductor chip light, no filament, no glass bubble, not afraid of vibration, not broken.

11. reduce labor costs, reduce the loss of ordinary fluorescent light in 3-5 years, to frequently break a lot of roots, and broken at the same time to ask the electrician to go up, so that both waste of manpower and increase wear and tear. Small numbers will also accumulate large expenses. And the Square LED Panel Lights, then the service life is 3 years, that is, in the 3 years, the lamps will not be damaged, even if there is a problem, you can also find manufacturers to help solve, so that both the cost of labor and no increase in wear and tear , Reduce the burden on enterprises.
 Look at the chip: the chip is a Square LED Panel Lights core light-emitting components, different brands, different models of light beads luminous efficiency and color rendering index are different. So in the purchase, pay attention to understand the chip quality, good chip not only long life, and luminous efficiency, color rendering index are relatively high, the use of a wider range of occasions.

Look at the color temperature: different lighting places, such as the bedroom, living room, kitchen and toilet lighting needs are not the same, this time you can see the color of the Square LED Panel Lights to choose. Square LED Panel Lights color temperature range of 2700K ~ 6500K, the smaller the value of bias yellow, and vice versa to blue.

See luminous flux: luminous flux popular refers to the brightness. Different environments, different areas need different light. In the same flat, depending on the environment, the number of Square LED Panel Lights used is different. At the time of purchase, you can consult the sales staff according to your own space requirements. When selecting a fixture, combine the lighting environment, refer to the product's luminous flux index, or pay attention to the brightness of the light, try to choose a bright enough but not dazzling lamps.

See color rendering index: look at the color index is to see the color of the object in the light of the true degree, the value is generally 0--100, now Square LED Panel Lights color standards are greater than 75 or more, it is recommended to choose more than 80 better.

Previous:How To Choose A Good 300x300 LED Panel Lights Next:Analysis Of The Structural Problems Of Rectangle LED Panel Lights