How To Install Appropriate Golf Course Led Lighting At Golf Course?
Golf is an outdoor sport that makes full use of space. People walk on the grass and the ball flies in a space of 10,220 meters. So when considering the stadium lighting.
Not only should the player's walking illuminance and the illuminance of the ball fall on the lawn be taken into consideration, but more importantly, the light of the court’s upper space on the court should be as uniform as possible without making the sphere dim. In other words, using floodlighting,
Using one or more large-area lighting, or small light sources from multiple directions, makes the lighting soft and satisfies the visual requirements of the golfer, so that the light can be enjoyed under the light and in the sun.
In the golf course lighting, a hole is mainly composed of three parts: a tee, a fairway, and a green. Among them, the fairway includes BUNKER, POOL, BRIDAGE, SLOPE, HILLS, and LONGGRASS.
Different parts such as CARPATH. Due to the different design styles of each stadium, the layout of these parts in the course is not the same. And,
Bunkers, water hazards, and long grass areas are defined as court obstacles in the "Golf Rules." They will make players feel a challenge, and night lighting must also properly consider them.
In order to help exert their proper role. Appropriate golf course led lighting arrangements can also increase the fun and challenge of playing golf at night.
For each hole, the tees are the primary area. The lighting designed here should try to make the ball and the end of the driver well visible to the left or right hand.
Does not interfere with serving. The horizontal illuminance is generally required to reach 100 to 150 lx, and the lamp is mainly based on a wide-distribution light projector, and lighting is performed in both directions as much as possible.
Avoid the shadow of the ball, club or player falling in the direction of the ball or hitting the ball, affecting the player's vision.
When installing, the lamp pole is often installed at the back edge of the tees at least 115m. For larger tees, sports lighting are required (Fig. 1). The mounting height of the tees is
Should be greater than or equal to half the total length of the tees, but not less than 9m. The installation practice shows that increasing the installation height will effectively improve the lighting effect of the tee, such as lighting with a 14m high pole.
The effect is much better than using a 9m low beam lighting.